With emergency local engineers covering all areas, ready 24 hours a day*, A2B Hillingdon Plumbers can provide help with most expediency. Our Hillingdon plumbing engineers come with a target response time of less than 2 hours* and we only charge from the time of arrival. No payment is taken until the work is completed and you have signed to say you are satisfied! (deposit may be required for parts purchased).
At A2B Hillingdon Plumbers we specialise in solving all types of plumbing problems including burst pipes in Hillingdon, shower/bath leaks, toilet faults and blocked drains. We are registered with many Quality Assurance Firms such as the Gas Safe Register, so that you know you are in safe hands.
Your satisfaction and safety is our top priority as we hope that you will not only re-use our services but also recommend us to your friends and family. Our local plumbing team covering Hillingdon pride themselves on being fast, efficient and reliable. Whether you have a leaking tap, a boiler breakdown or you have any other plumbing problem, call our free phone line for free quotes and estimates.
Our Local Hillingdon plumbers are CRB checked
Recommend us to your friends
Our local heating engineers covering Hillingdon are GAS Safe Registered, ensuring a high quality of work and peace of mind.
Burst Pipe Repair
If you discover a burst or leaking pipe, our fully trained plumbers will respond within 30-90 minutes* in Hillingdon.
From a simple faucet installation to a full bathroom suite, our experienced plumbers are able to carry out plumbing installations at a time that suits you best.
A2B Hillingdon Plumbing services include:
- 24 Hour Plumbers*
- Free Written Quotes
- Domestic & Commercial Service
- Insurance Approved
Example Of Our Services
Fitting new taps can be required either because it is part of the installation of a new bath/basin, or because the taps on a bath/basin have become old and worn or simply for cosmetic reasons. The type of taps you can have are dependent upon your bath or basin.
If there is one hole for the taps, then you will require a mono-bloc mixer (these have two smaller diameter pipes coming out of the single hole for hot and cold).
If there are two holes, then you can have separate hot and cold taps, or a two hole mixer (two taps joining into one spout). Some mixers also have a lever on them for controlling the plug (i.e. opening and closing).